Tired of burning cam sensors on your Evo ? don't want to hassle making a heat shroud ? that's the product for you 🔥🔥
 
The relocation kit basically turn the sensor 180 degrees to avoid the heat coming from the exhaust manifold.

The housing was CAD designed on a 3D Scanned Evo 4G63 head and fits perfectly. It is made out of 6061 Aluminium with T6 heat treatment for the ultimate strength.
 
This simple solution will save you a lot of hard time tuning your car and replacing sensors in the future.

Moreover , it comes with two o-rings on the front and the back. No more silicon and gaskets that break easily. The o-rings are perfectly matched and will last much longer then the OEM gasket and RTV silicon used to seal the housing against the head cylinder.
 
This kit does come with installation manual - you will need to turn the trigger that is bolted to the cam accordingly.

What's in the Box ?

* Cam Sensor Relocation Housing
* 2x O-rings to fit in the housing - Front + Back
* 3x bolts to close the Cap on the housing
* 1x M6 bolt to mount the cam sensor
* 1x M8 bolt to mount the housing onto the cylinder head